When researching a kitchen scale, you will notice hundreds of options.
Etekcity is among some of the best. Each scale has different features and weight capacities. The most important question you should ask yourself is, are Etekcity scales accurate?

The Etekcity scale is very accurate. During manufacturing, they are calibrated using a finite system to ensure they are extremely accurate. This means that the scale can decipher whether it is missing a few grains of rice and will adjust accordingly.

Knowing that the Etekcity scale is accurate and a trusted brand is one thing; testing the theory is another. Keep reading to learn how to test to see if your Etekcity scale is accurate, and learn some troubleshooting tips when you run into errors.

How to Test Etekcity’s Accuracy

It is important to check regularly to see if your kitchen scale begins at 0. This will prevent the preparation of food and provide better information for nutrition logging, as it ensures the scale is accurate. Here’s how:

  1. Turn on the kitchen scale
  2. Take some pocket change
  3. Place one nickel on the scale and note the weight
  4. Repeat the above step twice
  5. If the scale is accurate, it will have gone up by the same amount of weight as the first nickel each time
  6. If your reading is off, try to repeat this with a quarter or a penny

After performing this test, you should be able to determine whether or not your Etekcity scale is accurate. 

Before placing any food on it, be sure to give it a wash. Money is dirty, and you do not want to contaminate your food.

If you’ve decided you want an Etekcity scale, we’ve found many locations you can buy one at and which is the best for your needs.

Etekcity Scale Out of Sorts

As wonderful as the Etekcity kitchen scales are, they sometimes do not provide the right information. This can be due to a simple malfunction, power issue, or something else entirely. 

Below are some troubleshooting tips to help you get your scale working again.

Factory Reset

A factory reset is one way to get your scale accurate again. This is a good method because scales from Etekcity come pre-calibrated from the manufacturer. 

A factory reset means that when the Etekcity scale resets, it returns to the original calibration settings.

To reset an Etekcity scale, remove the batteries from the battery compartment located at the bottom of the scale. Wait a few moments. Then place fresh batteries back into the scale.

Broken Scale

The problem could also be with the hardware. A kitchen scale may sometimes fall off a counter or be damaged in some other way. This type of accident can damage even the strongest scales.

Ensure that the hardware of your Etekcity scale is not damaged. The LCD screen should not be cracked or broken; if it is, it should not have any similar damage. 

Buying a new one from Amazon may be necessary if you find hardware issues with your current scale. Etekcity’s warranty does not cover normal wear and tear.

Calibration Crisis

Etekcity typically calibrates its kitchen scales during manufacturing. By doing so, everyone will have access to an accurate, high-quality scale. 

The scale can lose its calibration during manufacturing if something goes wrong.

If you have a scale with a bad calibration, you may want to try to recalibrate it. 

This is done through a phone call to the Eketcity customer support portal. If they cannot help you, they will help you find an alternative solution.

Too Much or Too Little Weight

Kitchen scales have a minimum and maximum weight required to function properly. The Etekcity kitchen scales are no different. 

Most kitchen scales have a maximum weight of 11lbs and a minimum of 1 gram. 

If you put too little weight or too much weight on the scale, it will result in a malfunction. When this is the case, you should try to add or subtract accordingly. 

Sometimes, it is easiest to create two batches of weights and add them separately so you do not overburden the scale. 

Power Issues

A low or dead battery may be causing problems with your Etekcity scale. An error message will appear on the LCD screen of the scale when this occurs. 

When this occurs, you should obtain a new set of batteries.

AAA batteries are required by the majority of Etekcity kitchen scales. Open the battery compartment at the bottom of the scale and replace the old batteries with new ones. 

It is important to pay attention to both positive and negative polarity signs to achieve the best results.

Etekcity Scales are Accurate

Overall, Etekcity scales are very accurate, straight out of the box. They offer precise measurements that will allow any aspiring chef to cook confidently. If you find an issue with your scale, call the Etekcity customer service line, they will be more than happy to help.